Products
Contact Us
Tel: +86-577-86866707
Fax: +86-577-86866707
Mob: +86-15906484621
E-mail: kaysenflange@hotmail.com
ASME B16.48 Spectacle Blind Flange Spade, Ring Spacer
Male Oval Ring-Joint Facing Figure-8 Blanks Flange Class600
Standard: ANSI B16.48
Flange type: Male Oval Ring-Joint Facing Figure-8 Blanks Flange
Size range: 1/2''-24''
Pressure: Class 600
Material: Stainless Steel ,Carbon Steel,Alloy Steel,Copper&Nickel Alloy,Nickel Alloy
Standard: ANSI B16.48
Flange type: Male Oval Ring-Joint Facing Figure-8 Blanks Flange
Size range: 1/2"-24"
Pressure class: Class600
Surface treatment:Anti-rust oil,transparent/yellow/black,Anti-rust paint,Zinc,Hot dipped
galvanized
Specialize:As per drawing
Material of Male Oval Ring-Joint Facing Figure-8 Blanks Flange :
Stainless Steel Material of Male Oval Ring-Joint Facing Figure-8 Blanks Flange :
ASTM A182F304,304L,304H,316,316L,316Ti,310,310S,321,321H,317,347,347H,904L
Duplex stainless steel UNS S32304,S31803,S32205.
Super Duplex stainless steel UNS S32750/S32760/S31260/S32550/S32707
Carbon Steel Material of Male Oval Ring-Joint Facing Figure-8 Blanks Flange :
ASTM A105, Q235, A350 LF2,ASTM A694 F42/F46/F52/F60/F65/F70/F80
Alloy Steel Material of Male Oval Ring-Joint Facing Figure-8 Blanks Flange :
ASTM A 182, GR F1,F5, F9, F11, F22, F91
Copper&Nickel Alloy Material of Male Oval Ring-Joint Facing Figure-8 Blanks Flange :
CU/NI 90/10, CU/NI 70/30
Nickel Alloy Material of Male Oval Ring-Joint Facing Figure-8 Blanks Flange :
Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Surface treatment:Anti-rust oil,transparent/yellow/black,Anti-rust paint,Zinc,Hot dipped
galvanized
Usage:Oil field, Offshore,Water system,Shipbuilding,Natural gas,Electric power, Pipe
projects,etc.
Standard: ANSI B16.48
Flange type: Male Oval Ring-Joint Facing Figure-8 Blanks Flange
Size range: 1/2"-24"
Pressure class: Class 600
Material: Stainless Steel ,Carbon Steel,Alloy Steel,Copper&Nickel Alloy,Nickel Alloy
| Dimensions of Class 600 Male Oval Ring-Joint Facing Figure-8 Blanks |
||||
| NPS | Inside Diameter,B, mm |
Centerline Dimension,A, mm |
Thickness,t, mm |
Web Width,W mm |
| 1/2 | 21 | 65 | 6.4 | 38 |
| 3/4 | 27 | 80 | 9.7 | 45 |
| 1 | 34 | 90 | 9.7 | 51 |
| 1 1/4 | 42 | 100 | 9.7 | 57 |
| 1 1/2 | 48 | 115 | 9.7 | 57 |
| 2 | 61 | 125 | 12.7 | 51 |
| 2 1/2 | 73 | 150 | 15.7 | 57 |
| 3 | 89 | 170 | 15.7 | 67 |
| 3 1/2 | 102 | 180 | 19.1 | 67 |
| 4 | 114 | 215 | 19.1 | 73 |
| 5 | 141 | 265 | 22.4 | 73 |
| 6 | 168 | 290 | 28.4 | 73 |
| 8 | 219 | 350 | 35.1 | 83 |
| 10 | 273 | 430 | 41.1 | 121 |
| 12 | 324 | 490 | 47.8 | 121 |
| 14 | 356 | 525 | 50.8 | 121 |
| 16 | 406 | 605 | 57.2 | 127 |
| 18 | 457 | 650 | 63.5 | 133 |
| 20 | 508 | 720 | 69.9 | 127 |
| 24 | 610 | 840 | 82.6 | 152 |
GENERAL NOTE:
1.Dimensions are in millimeters
2.Hole size (where required due to bolt spacing) shall be the same as the flange bolt hole and located such that it will not interfere with bolting between two flanges.
3. Oval ring-joint dimensions shall be in accordance with ASME B16.20, exceptTh=T+t,where T is the ring height specified in ASME B16.20.
